home *** CD-ROM | disk | FTP | other *** search
- Path: news.mindspring.com!usenet
- From: jjerrim@comminfo.com (John Jerrim)
- Newsgroups: comp.dcom.modems
- Subject: Re: Help with IRQ problem
- Date: Thu, 25 Jan 1996 13:21:23 GMT
- Organization: CTS, Inc.
- Message-ID: <31078218.63005181@news.atl.mindspring.com>
- References: <4e79bh$n7e@pulp.ucs.ualberta.ca>
- Reply-To: jjerrim@comminfo.com
- NNTP-Posting-Host: jjerrim.mindspring.com
- X-Newsreader: Forte Agent .99c/16.141
-
- bonitlee@gpu1.srv.ualberta.ca (Bonita Lee) wrote:
-
-
- >He has just installed an Ethernet LAN at home and
- >ran into an IRQ conflict problem.
- >I used MSD and could not find any available IRQ he can use.
-
- MSD does not do a good job at detecting IRQs used by devices - check
- out IRQInfo and IRQInfo PRO at our home page below...
-
- >Is it possible to use all the above devices in Windows for WorkGroup
- >without disabling the keyboard, floppy, HD etc.?
- >Would I be able to use one of the 'reserved' IRQ: 10,11,12 or 15?
-
- MSD "reserved" IRQs are available for use by devices, but MSD
- generally does not detect when these IRQs are really being used by
- devices. You should not have a problem getting all of the devices
- working correctly if you have some degree of flexibility with your IRQ
- selections.
- John Jerrim
- Computer Telecommunication Systems, Inc.
- Diagnostic & Installation Products for Modems & Serial Ports
-
- World Wide Web: http://www.comminfo.com
- FTP: ftp://ftp.comminfo.com/users/www00402
- E-Mail: jjerrim@comminfo.com
- Voice: 1-770-263-8623
- FAX: 1-770-263-0124
-
-